The fuel system, Lp gas regulator caution, Lp gas regulator – Kenmore 122.161249 User Manual

Page 4: Safety information

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SAFETY INFORMATION

The Fuel System

Gas grills are used safely by millions of people when

following simple safety precautions.

The items in the fuel system are designed for
operation with this Kenmore grill. They must not be

replaced with any other brand. (See parts list for
replacement items.)

GAS BURNER:

The gas burner is constructed of

tubular stainless steel and should not require

maintenance other than inspection for insects/nests
inside the air intake slots.

BURNER VALVE/REGULATOR:

The burner

control is actually a regulator/valve assembly. On
the right side of the grill, the regulator attaches
directly to the end of the burner and also to a 1-

pound propane cylinder. Only an identical part

gas/valve regulator must be used. (See parts list for

replacement items.)

LP GAS REGULATOR CAUTION

The gas pressure regulator provided with this
appliance must be used. This regulator is equipped

with the required orifice and is set for the required

outlet pressure for this appliance. This combination
of orifice size and pressure regulation specifications

provides the cooking performance intended by
Kenmore Table Top Grill. Substitution of regulator
by any other device or any other manufacturer is

dangerous and could result in serious injury.

LP GAS REGULATOR

The gas pressure regulator is shipped loose and

must be installed prior to operating your grill. This is

a “slip-fit”~ requiring no tools. See assembly

instructions on page 7 for proper installation. The
regulator may be removed from the grill after use.

Turn the regulator control knob to the “OFF” position;
disconnect the LP cylinder and allow the grill to cool

for at least 30 minutes prior to removing regulator.

Care should be taken to store the regulator in a
clean, secure location when the grill is not in use.
The threaded cylinder connection area should be

kept clean and free of dust, dirt, sand or any

foreign materials. Clean both the regulator and

LP cylinder threaded areas prior to connecting

cylinder to regulator.

PROPANE FUEL: WARNING

- propane is a

flammable gas. Improper handling may result in

an explosion and/or fire and serious accident or

injury. Your grill is designed to operate with
propane (LP) gas only and is equipped with the
proper orifice for propane gas.

WARNING:

Do not connect this grill with any

gas supply other than propane. Propane gas is

heavier than air and settles in lower areas. Make

certain adequate ventilation is available when

using your grill. The gas cylinder may be stored

outside in a well-ventilated area out of the reach
of children when the grill is not in use.

LP GAS CYLINDER:

This grill is designed and

intended to be used with a disposable propane

cylinder with a nominal fuel weight of 1 lb. Such
a cylinder is approximately 4” in diameter and 7”

long. The Kenmore Table Top Grill does not
include an LP gas cylinder. This must be
purchased separately and be found at most
hardware stores. The cylinder used must be

constructed in accordance with the specifications

for LP cylinders of the U.S. Department of

Transportation (DOT) DOT-39 NRC232/290 MIIIO.

Advertising