Features, Ver.1.04, Functional specifications – Contec Fanless User Manual

Page 2

Advertising
background image

Ver.1.04

BX-710-AC, BX710P2-AC, BX710P4-AC

2

Functional Specifications

Model BX-710-AC5

BX-710P2-AC5

BX-710P4-AC5

CPU

Ultra Low Voltage Intel® Celeron® M Processor 1.06GHz (FSB533MHz)

Chip set

Intel® 945GME + ICH7M-DH

BIOS

BIOS (mfd. by Award)

Memory

1GB, 200pin SO-DIMM socket, PC2-4300 (DDR2 533) DDR2 SDRAM support

Graphic

Controller

Built in Intel 945GME

Video RAM

Main memory shared

Video

BIOS

64KB(C0000H-CFFFFH)

Analog RGB

640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 600, 1,280 x 720, 1,280 x 768, 1,280 x 960, 1,280 x 1,024, 1,360 x 768,
1,400 x 1,050, 1,600 x 900, 1,600 x 1,200, 1,856 x 1,392, 1,920 x 1,080, 1,920 x 1,200, 1,920 x 1,400, 2,048 x 1,536 (16,770,000

colors)

System
resolution

LVDS

640 x 480, 800 x 600, 1,024 x 768 (26,000,000 colors)

Audio

AC97 compliant, LINE OUT x 1, MIC IN x 1

Storage

SATA

Serial ATA 1.0 compliant support: 1 port

LAN Intel®

82573L

Controller

1000BASE-T/100BASE-TX/10BASE-T x 2 (Wake On LAN support only A side of the main body silk.)

USB

USB 2.0-compliant 6 port

Serial I/F

RS-232C (general-purpose) : 2 port, Baud rate : 50 - 115,200bps
RS-232C (for touch panel communication) : 1 port, RS-422/485 (general-purpose): 1 port, Baud rate : 50 - 115,200bps

Watch dog timer

1sec - 255sec (RESET, interrupt or external output is allowed at time expiration)

RAS

Remote reset

External input signal

General-purpose I/O

3 opto-isolated inputs and outputs (However, one output also serves as an external WDT output and one input also serves as
remote reset. They become available when switched.)

Hardware monitoring

Monitoring CPU temperature, board temperature, power voltage

RTC/CMOS

ICH7M-DH built in. The real-time clock is accurate within 3 minutes (at 25 C) per month.
Lithium backup battery life: 10 years or more

Power Management

Power management setup via BIOS. Modem Ring On/Wake One LAN.
Supports PC98/PC99 ACPI Power management.

Interface

Display 2

port

(15pin HD-SUB connector [Analog RGB] x 1, 26 pin half pitch connector [LVDS] x 1)

Audio

LINE OUT:

φ3.5 Stereo mini jack, Full-scale output level 1.5Vrms (Typ.), Dual 50mW Amplifier

MIC IN:

φ3.5 Stereo mini jack, Full-scale input level 1.6Vrms (Typ.)

CF card slot

2 slots (CF1/CF2), CF CARD Type I, bootable
Windows Embedded Standard pre-install CF model : CF (2GB) is finished mounting (one partition)

HDD

2 slots , Slot-in method, 2.5 inches SATA hard disk
Windows XP Professional pre-install model : SATA HDD (80GB) is finished mounting (one partition)
Windows Embedded Standard pre-install SSD model : SATA SSD (2GB) is finished mounting (one partition)
The other model : It is not mounted.

LAN*2

2 port (RJ-45 connector)

USB

6 port (A-TYPE connector)

RS-232C

2 port (9 pin D-SUB connector [male])

RS-422/485/

General-purpose I/O/RAS

1 port (15 pin D-SUB connector [female])

Expansion board slot

None

PCI slot x 2,

Usable board dimension : 240mm (Max.)

PCI slot x 4,

Usable board dimension : 240mm (Max.)

Power supply connector

100-240VAC(50/60Hz) input automatic operation switch

Input power supply voltage

85 - 264VAC (47 - 63Hz)

Current consumption

90VA (Max.)

115VA (Max.)

130VA (Max.)

Expansion board power supply

capacity

None

+12V

0.5A, +5V 1A,

+3.3V

1A, -12V 80mA,

-5V Not

supplied

+12V

0.5A, +5V 2A,

+3.3V

2A, -12V 80mA,

-5V Not

supplied

Power supply

External device power supply

capacity

CF card slot

: +5V

500mA *1

USB I/F
: +5V

3A (500mA×6) *1

CF card slot

: +5V

500mA *1

USB I/F
: +5V

3A (500mA×6) *1

Expansion board slot
(total 2 slot)

: +12V 0.5A, +5V 1A *1,

+3.3V 1A, -12V 80mA,
-5V

Not supplied

CF card slot

+5V 500mA *1
USB I/F
: +5V

3A (500mA×6) *1

Expansion board slot
(total 4 slot)

: +12V 0.5A, +5V 2A *1,

+3.3V 2A, -12V 80mA,
-5V

Not supplied

Physical dimensions
(mm)

262(W) x 262(D) x 55(H)
(No protrusion)

262(W) x 262(D) x 110(H)
(No protrusion)

262(W) x 262(D) x 150(H)
(No protrusion)

Weight

3.1kg

(At the time of the HDD(SSD)

uninstalling)

3.9kg

(At the time of the HDD(SSD)

uninstalling)

4.3kg

(At the time of the HDD(SSD)

uninstalling)

*1 The total of the external device power supply load for +5V should be 3A or lower. * The PCI bus slot is for 32 bit specification. No operational tests are done for the 32/64 bit boards.

Features

Advertising