Contec Fanless - Manual (Page 3)

Ver.1.04
BX-710-AC, BX710P2-AC, BX710P4-AC 3
Installation Environment Requirements
Parameter Requirement description
Allowable instantaneous Less than 20ms
power outage One minute each for AC2.0kV (input - FG) 20mA
Power supply
specifications
Dielectric strength 50M Ω (500VDC)
Operating temperature
0 - 50 °C (SSD in use),
0 - 45 °C (HDD in use)
Storage temperature -10 - 60 °C
Humidity 10 - 90%RH (No condensation)
Floating dust particles Not to be excessive
Corrosive gases None
Line noise
AC line/ ±2kV,
Signal line/ ±1kV (IEC61000-4-4Level 3, EN61000-4-4
Level 3)
Line-noise
resistance Static
electricity
resistance
Contact discharge/ ±4kV (IEC61000-4-2 Level 2,
EN61000-4-2 Level 2)
Atmospheric discharge/
±8kV (IEC61000-4-2 Level 3,
EN61000-4-2 Level 3)
Vibration
resistance
*1
Sweep
resistance
10 - 57Hz/semi-amplitude 0.15mm 57 - 150Hz/2.0G
40 min. each in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
Impact resistance *1
10G, half-sine shock for 11 ms in x, y, and z directions
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Ambient
specifications
Grounding Class D grounding (previous class 3 grounding)
*1 When the HDD is not in use.
CF Card
CF-1GB-B 1GB CompactFlash for Fix Disk
CF-2GB-B 2GB CompactFlash for Fix Disk
CF-4GB-B 4GB CompactFlash for Fix Disk
CF-8GB-B 8GB CompactFlash for Fix Disk
TFT color liquid-crystal display
< Analog RGB types >
FPD-H21XT-AC (15inch 1024 x 768 dots,
Panel mounted type)
FPD-L21ST-AC (12.1inch 800 x 600 dots,
Panel mounted type)
FPD-M21VT-AC (10.4inch 640 x 480 dots,
Panel mounted type)
< LVDS&DVI input type >
FPD-H71XT-DC1 *1
(15inch 1024 x 768 dots,
Panel mounted type)
FPD-L71ST-DC1 *1 (12.1inch 800 x 600 dots,
Panel mounted type)
FPD-S71VT-DC1 *1 (6.4 inch 640 x 480 dots,
Panel mounted type)
FPD-H75XT-DC1 *1 (15inch 1024 x 768 dots,
Embedded
type)
FPD-L75ST-DC1 *1 (12.1inch 800 x 600 dots,
Embedded
type)
FPD-M75VT-DC1 *1 (10.4 inch 640 x 480 dots,
Embedded
type)
*1 Please Purchase an optional cable for connection [ FPD-26M26M-005, FPD-26M26M-020,
FPD-26M26M-050 ].
Display cable only for LVDS
FPD-26M26M-005 LVDS Cable (0.5m)
FPD-26M26M-020 LVDS Cable (2m)
FPD-26M26M-050 LVDS Cable (5m)
Touch-panel cable for an analog RGB display
IPC-CBL3-2 AT host Touch panel, COM cable
(2m)
IPC-CBL3-5 AT host Touch panel, COM cable
(5m)
Terminal block for connecting the RAS connector
IPC-PSD-20 Terminal block for connecting the
RAS connector
CAUTION
Precautions when using products other than our options
-
If a product other than our option is used, the normal operation may be
impaired or the functions may be limited.
BX-710-AC5xxx BX-710P2-AC5xxx BX-710P4-AC5xxx
Name Pcs. Pcs. Pcs.
BOX-PC 1 1 1
The attachment fittings 2 2 2
Slot cover 0 2 4
CF attachment fittings 2 *4 2 *4 2 *4
AC cable 1 1 1
Screws for attachment fittings
Three-point sems screw (M4 x
8)
4 4 4
Screws for 2.5” drive, slot
cover, CF attachment fittings
Three-point sems screw (M3 x
6)
6 8 10
AC cable clamp 1 1 1
USB/ sound cable clamp 2 2 2
Product guide (this sheet) 1 1 1
IPC Precaution List 1 1 1
Royalty consent contract 1 *3 1 *3 1 *3
Setup Procedure Document 1 *3 1 *3 1 *3
Notes on using Windows
Embedded Standard
1 *2 *3 1 *2 *3 1 *2 *3
Recovery Media*1 1 *3 1 *3 1 *3
*1 Please confirm latest information on the CONTEC homepage though the user's manual is
stored in Recovery Media. The installation method is described in this document as well as
the UsersManual. [File storing place: ¥Manual]
*2 It is not packed to the Windows XP Professional pre-install model.
*3 It is not packed to the OS uninstall model.
*4 It is attached in advance to the main body 1pcs in CF install model.
(1) Battery --- The internal calendar clock and CMOS
RAM are backed by a Lithium primary
battery. The backup time at a temperature
of 25°C with the power disconnected is 10
years or more.
(2) HDD --- The OS-installed model with Windows XP
Profettional uses a HDD for the OS storage
area. Estimated service life: 5 years or
15,000 power on hours, whichever comes
first.
(3) CF, SSD --- The OS-installed model with Windows
Embedded Standard 2009 uses a CF card or
a SSD for the OS storage area. Estimated
failure rates: 100,000 rewrite cycles,
500,000 hours MTBF
* Replacement of expendables is handled as a repair (there will be a charge).
The difference point with the IPC-BX700 series is shown in the
following.
IPC-BX700 series IPC-BX701 series BX-710 series
CPU Ultra Low Voltage Intel®
Celeron® M Processor
1.0GHz(FSB400MHz)
Ultra Low Voltage Intel®
Celeron® M Processor
1.0GHz(FSB400MHz)
Ultra Low Voltage Intel®
Celeron® M Processor
1.06GHz(FSB533MHz)
Chip set Intel® 855GME Intel® 855GME Intel® 945GME +
ICH7M-DH
Memory 512MB １ GB １ GB
System
resolution
(Max.)
1,600 x 1,200 (16,770,000
colors)
1,600 x 1,200 (16,770,000
colors)
2,048 x 1,536 (16,770,000
colors)
LVDS I/F None LVDS I/F x 1 LVDS I/F x 1
LAN 100BASE-TX/10BASE-T
x 1
1000BASE-T x 1,
100BASE-TX/10BASE-T
x 1
1000BASE-T × 2
Storage 2.5 inch IDE HDD or
silicon disk drive
2.5 inch IDE HDD or
silicon disk drive
2.5 inch SATA HDD
PS/2 I/F 1 1 None
Packing List
List of Options
Component Life
Difference from IPC-BX700 series