Contec Fanless - Manual (Page 5)

Ver.1.04
BX-710-AC, BX710P2-AC, BX710P4-AC 5
The BOX-PC can be installed in any orientation (1) through (3).
Avoid orientation (4) through (6) since it might not adequately
dissipate heat. In addition, take appropriate measures so that
the ambient temperature falls within the range of installation
environment conditions, such as keeping the system unit
well-ventilated and sufficiently spaced its surroundings.
Installation Orientation
CAUTION
Note that even though the ambient temperature is within the specified range,
an operational malfunction may occur if there is other device generating
high heat; the radiation will influence the product to increase its
temperature.
Distances between the BOX-PC and Its Vicinity
Minimum distance for installing / removing drive
CAUTION
- The wall temperature must be under the product assurance temperature.
- Please adjust the air current to prevent the reject heat from the product
staying around the product.
- Do not install this product into the fully-sealed space except the case in
which the internal temperature is adjustable by equipment such as air
conditioner. Troubles such as operational malfunctions could be occurred
by the temperature increase caused by long-term usage.
Ambient temperature
In this product, the ambient temperature is decided from the
multiple measurement points as shown below. When making
use of the product, the air current should be adjusted to prevent
that all the temperatures measured at the measurement points
exceed the specified temperature.
System Configuration
Installation Requirements