Kenmore 141.173373 - Manual (Page 14)

7. Instaii the Door Bracket to the inside of front
Cart Legs. Align the threaded holes on the Door
Bracket wth the holes on Cart Legs. Tighten
securely using 4 of the 1/4''x2” Pattern Head
Screws provided. (See Figure 3 on page 13)
Upper door bolt holes (at ends of bracket) must
face outward.
^ Installing The Cabinet Doors
For LP Gas grills:
1. Instaii the Door Stops to the Cart Bottom
Shelf and the Door Bracket. See Figure 4a.
2. Align the holes on the Door Stops with the
threaded holes on the top of the Cart Bottom
Shelf and bottom side of Door Bracket. Tighten
securely using 4 of the 1/4"x1/2" Pattern Head
Screws provided. See Figure 4a.
3. Remove the vdiite protective film from the
stainless steel Doors. Attach a Door Handle to
each Door using 2 of the M4x5mm Pattern
Head Screws provided. See Figure 4b. Be
careful not to scratch the Door surfaces.
4. When installing the Doors, make sure the
door bolt holes are located on the hinge sides
of the Cart Legs.
5. Instaii either Door by inserting 1/4"x5/8" partly-
threaded bolt through the lower door bolt hole
of the Door and into the tapped hole of the
Cart Bottom Shelf. Next, align the upper door
bolt hole of Door with the tapped hole in the
bottom of Door Bracket. Insert 1/4"x1/2" partly-
threaded bolt provided. Tighten both bolts
securely.
6 . Repeat these steps to instaii the other Door.
7. Install the Cart Spice Basket to the inside of Left
Door. Align the threaded holes on the inside of Left
Door with the holes on the Cart Spice Basket.
Tighten securely uang 2 of the 1/4"x1/2" Pattern
Head Screws provided. See Figure 4b.
Figure 4a (LP gas m odel only)
Figure 4b (LP gas model only)
UPPER DOOR
DOOR
BRACKET
14