Function indicator lights, Oven control keypads, Setting clock – Kenmore 790. 7260 User Manual

Page 10: To set the clock, Important note, Setting silent or audible control mode, Oven control functions, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Oven Control Functions

For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven.

•-----

©

Cook

Time

(2)

H

; Bake

Broil

(8)

[9J

(5>

OVEN

Timer :

Set/Off ^

Delay

Start

{6jm
(

7 ) 0

PREHEAT

DOOR LOCKED

V

; ■

STOP

Select

Clean

(3)

(4J

'.

(ii

LOCKOUT

(11)

Function indicator lights

- These indicator lights

located above the key

pad will glow when that

function is active.

Oven control keypads

1.

Clock

- Use to set the time of day.

2.

Cook Time

- Use Cook Time key pad when adding any

Cook Time instructions.

3.

Timer Set/Off

- Use to set or cancel the timer. Timer

Set/Off is used to set the continuous bake feature.

4.

Delay Start

- Use with Bake and Select Clean functions

to program a delay start bake or delay start self­

cleaning cycle.

5.

OVEN indicator light

- The OVEN light will glow each

time the oven turns on to maintain the set oven

temperature.

6.

PREHEAT indicator light

- The PREHEAT light will glow

when the oven is first set for cooking and remain on until

the oven reaches the set temperature.

7.

DOOR LOCKED indicator light

- The DOOR LOCKED

light will glow when the oven door locks or unlocks, oven

lockout is active or when Select Clean is active.

8.

Up / Down

arrow key pads - Use with the function key

pads to accept settings and to adjust temperature and

times.

9.

Bake

- Use to select Bake function.

10.

Broil

- Use to select variable broil function.

11.

STOP

- Use to cancel any active oven function except

clock or timer. Use to activate or cance I

OVEN

LOCKOUT.

12.

Select Clean

- Use to select a 2, 3 or 4 hour Self-Clean

cycle time.

Setting Oven Controls

Setting Clock

When the appliance is first powered up or when the power

supply to the appliance has been interrupted, 12:00 will

flash in the display (See Fig. 1). The time of day must first

be set before operating the oven.

To set the clock:

1.

Press

key pad once (do not hold key pad down).

2.

Within 5 seconds, press and continue pressing the

or N/ key pad until the correct time of day appears

in the display. Release key pad.

Important note:

The time of day cannot be changed when the oven is set

for cooking or when Select Clean is active.

Setting silent or audible control mode

The oven control is factory preset with audible tones active.

The control may be programmed for silent operation or with

normal audible tones.

To block the control from sounding when any key pad is

pressed, press and hold

Delay Start

key pad until the

control beeps once (about 6 seconds).

To return to the audible control mode, press and hold

Delay

Start

key pad until the control beeps once (about 6

seconds).

10

Advertising