Grounding instructions, Grounding type wall receptacle, Conversion to l.p. gas – Kenmore 790. 7260 User Manual

Page 6: À warning, A warning, Save these instructions for future reference, Important safety instructions, Product record, Serial plate location

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Important Safety Instructions

Grounding Instructions

Avoid fire hazard or electrical shock. DO

NOT use an adapter plug, an extension cord, or remove

grounding prong from electrical power cord. Failure to
follow this warning can cause serious injury, fire or death.

This appliance is equipped with a 3-prong grounding plug

for your protection against shock hazard and should be

plugged directly into a properly grounded receptacle.

DO

NOT

cut or remove the grounding prong from this plug.

For personal safety, the range must be properly grounded.

For maximum safety, the power cord must be plugged into

an electrical outlet that is correctly polarized and properly

grounded.

If a 2-prong wall receptacle is the only available outlet, it is

the personal responsibility of the consumer to have it

replaced with a properly grounded 3-prong wall receptacle

installed by a qualified electrician.

Grounding

type

wall receptacle

Do not under any

circumstance, cut,

remove, or bypass

the grounding prong.

Power supply cord

with 3-prong
grounding plug.

See

the

INSTALLATION

INSTRUCTIONS

packaged

with

this

range for complete installation and grounding instructions.

Conversion to L.P. Gas

À WARNING

I

Personal injury or death from electrical

shock may occur if the range is not installed by a
qualified installer or electrician.

A WARNING

I Any additions, changes or conversions

required in order for this appliance to satisfactorily meet

the application needs must be made by a qualified

technician.

This appliance allows for conversion to Liquefied Petroleum

(L.P.) Gas.

If L.P. conversion is needed, contact

your local L.P. Gas

provider

for assistance. The L.P. conversion kit is provided

with this appliance and is located on the lower REAR (back

side) panel of the range. Before installing the kit be sure to

follow the L.P. Installation Instructions carefully.

Save these instructions for future reference.

Product Record

In this space below, record the date of purchase, model

and serial number of your product. You will find the model

and serial number printed on an identification plate.

See

bottom of this page

for serial plate location.

Model

No.

Serial No.

790.

Date of Purchase

Save sales receipt for future reference.

Serial Plate Location

To locate the serial plate open storage

drawer (some models) or warmer drawer

(some models). The serial plate is attached

to the lower right oven frame.

Advertising