Number of incoming messages that can be recorded – Brother FAX-210 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
36
If you wish to go on to the next function, press
NEXT
and the LCD will display:
MSG CTR
ICM#:3
AUTO ANS
•PASSWORD
NOTE:
When the OGM is erased MSG CTR MODE (see p. 28) is automatically turned
OFF.
Number of Incoming Messages that can be recorded
Selecting the Incoming Message (ICM) number automatically determines the amount
of time available for each message. The more messages, the less time per message.
You have approximately 1 minute of OGM/ICM/MEMO capacity. This can be used for
1, 2 or 3 messages. Furthermore, the longer the Outgoing Message, the shorter the
total amount of time available for ICM (for instance, if you have a 16 second OGM,
you don't have a full minute for all of your ICMs, but only 43 seconds). The selection
of the numbers is done as follows:
If you are doing this before any of the above-described operations, you start with the
LCD displaying:
j- MSG CTR
— AUTO ANS
■L-PASSWORD
Press
"4".
The LCD will display:
MSG CTR
— AUTO ANS
''-PASSWORD
Use the cursor keys to select the number of ICMs, for instance:
f- MSG CTR
— AUTO ANS
''-PASSWORD
MSG CTR(1-8)?
ICM#:3
ICM#:2
CALL MSG:RECORD
MSG CTR(1-8)?
If you wish to go on to the next operation (see #4), press
NEXT
and the LCD will
display:
- MSG CTR
- AUTO ANS
-PASSWORD
Pressing
SET
will register your selection and the LCD will revert to:
- MSG CTR
- AUTO ANS
-PASSWORD
IMPORTANT: If you change the ICM number, OGM is automatically cleared.
Automatic Paging Recording
The Auto Page function is used as follows. Suppose you are away from your home or
office but are expecting an important call. All you have to do is to turn on the Auto
Page Function on your fax unit and register a telephone number at which you can be
reached. Once the Message Center of your unit records a telephone call, the unit will
call the registered number and when you pick up the phone you hear the
CALL
MESSAGE.
Thus, you'll know that there is a recorded message on your facsimile's
Message Center. In this step, we are showing you how to turn this function ON.