Brother FAX-2000P - Manual (Page 140)

Check Messages
Message Display Explanation, and action to be taken
Already store • A command already in use is selected.
• A transmission command is stored when scanner
transmission has already been reserved.
• Broadcasting or sequential polling is stored when they
have already been reserved.
^ Press the STOP button to discharge documents from the
ADF or repeat the operation when the operation
currently waiting is completed, or cancel the command.
Cannot transmit Automatic or manual transmission is attempted by entering
a telephone number from the numeric keypad while ADF
transmission is already registered.
^ Press the STOP button to discharge documents from the
ADF, or repeat the operation when the operation
currently waiting is completed, or cancel the command.
Memory not available When use of memory is attempted when memory is already
full.
i®“ Empty the memory by canceling the command.
Not Stored No document is received in a specified mailbox number or
a document received in a mailbox is printed out.
Check mailbox information and repeat operation.
No Command Stored The command is not assigned to the specified command
number.
Check the list of commands and restart the process.
Nothing stored • When the number of a party has not been stored in one-
touch or abbreviated dial.
• When nothing has been stored and print-out lists are
attempted for one-touch dial, or abbreviated dials or,
mailbox list, or command list.
^ Repeat operation again correctly.
128