Setting the dialing signal (pulse/tone), In standby mode, press function, 0,9 and enter, Press enter – Brother FAX-2000P User Manual
Page 48: Setting the dialing signal (puise/tone)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Dialing Signal (Pulse/Tone)
This setting allows you to select the dialing signal in accordance with the
type of line you subscribe to.
In standby mode, press FUNCTION, 0,9 and ENTER.
9 . U s e r S e t t i n g s
0 1 - 1 2 E n t e r / S e l e c t
1 . S e t P h o n e T y p e
0 1 - 2 5 E n t e r / S e l e c t
Press ENTER.
R o t a r y L i n e
E n t e r / S e l e c t
a. Press ENTER for connecting to a rotary pulse line.
b. Press SELECT, then press ENTER for connecting
to a PB tone line.
T o n e L i n e
E n t e r / S e l e c t
How to verify the correct setting.
• Pick up the handset. You will hear a dial tone
through the earpiece.
• Press any number on the keypad.
•
Then dial tone should stop.
36