Tuner section operation, Amplifier section operation – Pioneer VSX-452 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOTE CONTROL OPERATION
RECEIVER TUNER AND AMPLIFIER SECTION OPERATION
[TUNER SECTION OPERATION]
Set the AUDIO/VIDEO switch to AUDIO.
0 MPX button
Switches between MONO/AUTO STEREO during FM reception.
0 SCAN button
Use this to start memory scan of stations.
@ STATION (Down) button
This takes you to lower station numbers in sequence.
© STATION " + " (Up) button
This takes you to higher station numbers in sequence.
[AMPLIFIER SECTION OPERATION]
® FUNCTION button
Press to select the receiver input.
0 SIMULATED STEREO button
Switches simulated stereo mode ON/OFF.
0 3CH LOGIC button
Switches DOLBY 3CH LOGIC ON/OFF.
0 SURR. (Surround) MODE button
The surround mode is switched in the following manner each time the
button is pressed:
------------- ► DOLBY PRO LOGIC SURROUND--------------
■OFF ^STUDIO —SIMULATED SURROUND
® CENTER MODE/TEST TONE button
• AUDIO/VIDEO switch ... AUDIO position
Functions as a CENTER MODE button, enabling selection of the
DOLBY PRO LOGIC SURROUND and DOLBY 3CH LOGIC center mode.
• AUDIO/VIDEO switch ... VIDEO position
Functions as a TEST TONE button for switching the test tone ON/OFF.
® RECEIVER POWER button
Switches the receiver power ON/STANDBY.
@ RETURN button
Press to return the receiver to it's initial state. (Refer to page 13.)
(§) MUTING button
Press to temporarily reduce sound. Press again to return to the
original volume level.
® MASTER VOLUME ( + , -) buttons
Use to adjust the overall volume level.
© CENTER/REAR (-
1
-, -) buttons
• AUDIO/VIDEO switch ... AUDIO position
Function as CENTER LEVEL adjustment buttons
• AUDIO/VIDEO switch ... VIDEO position
Function as REAR LEVEL adjustment buttons
® SLEEP/DELAY TIME button
• AUDIO/VIDEO switch ... AUDIO position
Functions as a SLEEP button
Activates the SLEEP timer. The length changes in the following
manner each time the button is pressed:
BO
BO — 30 — off
LD-
CD — VCR -
-TUNER — PHONO
Unit: minutes
When SLEEP is ON, the display section is about half as bright as when
SLEEP is OFF.
• AUDIO/VIDEO switch ... VIDEO position
Functions as a DELAY TIME button. You can change rear speaker
delay time during DOLBY PRO LOGIC SURROUND or SIMULATED
SURROUND operation.
® TAPE 2 MONITOR button
Switches TAPE 2 MONITOR ON/OFF.
20
<ARB1424>