Speaker connections, Front/rear speaker, Cord connection .^o – Pioneer VSX-452 User Manual
Page 9: Center speaker cord connection, Rear
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
SPEAKER CONNECTIONS
Illustration shows U.S. and Canadian models.
Left
FRONT
Center
Right
Front/Rear speaker
cord connection
.^o
® Push ihe lever up (or down).
'
Insert the cord.
(D Pull the lever back.
NOTE:
Use speakers of impedance 80 — 16 0.
Center speaker cord
connection
® Push the lever down,
d) Insert the cord.
(3) Pull the lever back.
k
:..,
•NOTE:
Use if you want to use an addhionaipower
amplifier to boost center channel power
output. Refer to page 7 for connection
instructions.
NOTE-
When connecting a super woofer system such as the Pioneer
S-W1000, connect it to the same speaker terminals (A or B) to which
the front speakers are connected. Connecting the front speakers
md super woofer system to terminals A and B respectivNy will result
in reduced volume from the front speakers.
Front (R)
Super woofer
Front (L)
0 0
Right
/ \
0
©
V___
y
V___
REAR
NOTE:
Do not allow any of the cord's conductors to protrude from the terminals
or touch any other conductors. Malfunctioning or breakdowns may
occur when conductors come into contact with each other.
<ARB1424>