Brother MFC4550 PLUS User Manual
Page 159
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WARNING
• Do not force the jammed paper from the paper tray because you may
damage the MFC and cause toner to scatter on the next printed panels.
• After you have used the MFC, some internal parts of the MFC are
extremely HOT! When you open the top cover of the MFC, never touch
the shaded parts
shown in the following
diagram.
HOT!
L Clearing a paper jam in the multi-purpose sheet feeder.
If a paper is jammed inside the multi-purpose sheet feeder, open the
multi-purpose sheet feeder to pull the jammed paper upward out of the feeder;
then close the multi-purpose sheet feeder. Also, open the top cover and check that
a torn piece of paper does not remain inside the MFC (see the next section.)
Multi-purpose Sheet Feeder
147