Making a trial copy – Brother Fax-410M User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1II-8. MAKING A TRIAL COPY
8. MAKING A TRIAL COPY
Now that your fax machine is ready for use, it is a good idea to test
it by making a copy.
You can copy any document up to 8.5 inches/216 mm (A4 size)
wide. Follow the instructions below.
1) Set the document face down into the feeder. Adjust the guides
located on either side of the document if it is less than 8.5 inches
wide.
2) The following display appears on the LCD screen.
copy
F A X
E N T E R F A X N O .
C O P Y
P R E SS C O P Y K E Y
3) Press the COPY key. The fax machine draws the original through
and prints a copy.
The default setting for making copies is SUPER FINE. To change
this setting when copying photographs,press the RESOLUTION key
to light 'THOTO" LED, then press the COPY key.
When the copy has been printed, the automatic paper cutter will
cut the page from the paper roll.
The machine cannot read text or images closer than 4mm to any
edge of the document.
Do not pull on the paper while copying is in progress. This may
ruin the copied image.
III-8-1