Change the light bulb, Vii. machine specifications, Stitch – Brother 2340CV User Manual
Page 11: Sewing speed, Stitch length (pitch), Presser foot lift, Needle, Machine net weight, Vi. maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Actual examples of two needles three threads cover stitch sewing
1) Hems of T-shirts
(Simple stitch)
2) Stitches . ,
(Top stitched seams/Ribbing/Yokes)
3) Attaching tape
(edges of collars, etc) (Binding)
4) Decorative stitching
(Decorative stitching)
5) Attaching elastic
(Hem with sewn-in elastic)
6) Attaching lace
(Flat joining seam)
7) Belt loop sewing
(Belt loop sewing)
Actual examples of three-needles four-threads cover stitch sewing
1) Plain stitching
2) Hem stitching
3) Tape attaching
4) Circular hemming
5) Elastic lace attaching
18
Change the light bulb
VI. Maintenance
CAUTION
Always be sure to turn off the power before
carrying out the following operation. The glass
plate over the light bulb will be hot immediately
after using the machine, therefore it is advisable
to wait until the light bulb has had a chance to cool
down before changing bulbs.
Changing the light bulb.
• Remove the lamp cover as shown in the illustration.
• Loosen the lightbulb cover set screw pull up the light
bulb cover and remove it.
• Take out the light bulb and replace it with a new one.
© Screw
©Lamp cover
©Screw
©Light bulb cover
©Light bulb
VII. Machine specifications
Stitch
One needle two thread double chain stitch
Presser foot
Two needles three thread cover stitch (Wide 6 mm Free presser type
(15/64 inch)/Narrow 3 mm(1/8 inch))
Three needles four thread cover stitch (6 mm (15/64
inch))
Sewing speed
1,000 stitches per minute
Stitch length (pitch)
2 mm to 4 mm (5/64 to 5/32 inch)
Presser foot lift
5 mm to 6 mm (3/16 to 15/64 inch)
Needle
SCHMETZ 130/705H (90/#14)
Machine net weight
7.0 kgs.
19