Accessories included, I. names of parts and their functions, Accessories included o – Brother 2340CV User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONGRATULATIONS ON
CHOOSING THIS COMPACT COVER STITCH MACHINE
Your machine is a high quality, easy-to-use product. To fully enjoy all the features, we suggest that
you study this booklet.
if you need more information regarding the use of your machine, your nearest authorized dealer is
always happy to be of service.
Enjoy yourself!
CAUTION!
WHEN THREADING, REPLACING NEEDLE OR LIGHT BULB, BE SURE TO TURN OFF THE MAIN
POWER SWITCH OF THE MACHINE.
WHEN THE MACHINE IS NOT IN USE, IT IS RECOMMENDED THAT THE ELECTRIC SUPPLY PLUG
IS DISCONNECTED FROM THE WALL SOCKET TO AVOID ANY POSSIBLE HAZARDS.
Notes on the motor
The normal operating speed of this sewing machine is 1,000 stitches per minute, which is quite fast compared
to the normal operating speed of 300 to 800 stitches per minute forthe ordinary foot-operated sewing machine.
The bearings in the motor are made of a special sintered, oil-impregnated alloy mounted in oil-soaked felt to
withstand long hours of continuous operation.
Continuous operation of the sewing machine can cause heat to build in the motor area, but not enough to
adversely affect its performance.
It is important to keep fabric and paper away from the ventilating holes on the back and sides of the machine
so air can get to these holes.
When the motor is running, sparks can be seen through the ventilating hole in the motor bracket on the side
opposite the hand wheel. These sparks are produced by the carbon brushes and the commutator, and are
part of the machines normal operation.
CAUTION
WHEN THREADING THE MACHINE, REPLACING A NEEDLE, OR WHEN THE MACHINE IS NOT IN
USE, WE RECOMMEND DISCONNECTING THE ELECTRIC SUPPLY PLUG TO AVOID ANY POSSI
BLE HAZARDS.
I. Names of parts and their functions
0 Thread tree
@ Thread plate
® Presser foot pressure adjustment screw
0 Spool pin
0 Spool cushion
0 Spool support
0 Thread take-up cover
0 Material plate cover
0 Needles
0 Differential feed raito adjustment dial
0 Stitch length adjustment dial
0 Presser foot
0 Front cover
0 Hand wheel
0 Main power switch and light switch
0 Presser foot lifting lever
© Spool stand
0 Left needle thread tension dial
0 Center needle thread tension dial
0 Right needle thread tension dial
0 Looper thread tension dial
0 Thread guide
0 Looper
0 Looper release lever
0 Lopper thread take up
0 Foot controller:
XC7359021 (110/120V Area)
XC7438321 (220/240V Area)
XC7456321 (U.K.)
XE0629001 (Australia, New Zealand)
XC7438321 (Germany)
Accessories included
o
©
©
©
(0^
o
Soft cover
X77871001
O Accessory bag
122991002
0 Tweezers
X75902001
O Thread net (4)
X75904000
0
Thread spool cap (4)
X77260000
©Spool mat (4)
XB1218000
O Cleaning brush
X75906001
0
Hexagonal wrench
XB0393001
0
Needle set: SCHMETZ 130/705H
(90/#14):3pcs.
XB1216001
® Special presser foot (LC1) XB1265001
The special presser foot is used when an
optional attachment is used.