Mz3500, Y ^ jf -y – Sharp MZ-3500 User Manual

Page 91

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MZ3500

( Check No. 4 )

( Check No. 5 )

/<.y ^ Jf -y

> K W

"H" in red

“H” in green

“H” in white

( Check No. 6 )

( Check No. 7 )

( Check No. 8 )

Backroung in red

Back ground in green

Back ground in black

' in blue

I" in red

I* "H" ir

}....

}
}....

H*‘ in green

in white

4) Speaker test

Performance of the speaker and the volume control are

tested. Listen carefully to detect any abnormal sound or

mulfunction. Adjust the volume control to a suitable listen­

ing level.

5) Printer interface test

Performance of the printer interface signal lines and action

of the 8255 are tested.

[Dispaly]

(1) Normal test ending

PR

OK

(2) Abnormal test ending

PR

ER

.

6) Light pen interface test

Performance of light pen interface signal lines and the

action of the GDC are tested.

[Display]

On the upper left corner of the screen is displayed character

and line.

(1) Normal test ending

LP

OK

(2) Abnormal test ending

LP

ER

7) RS232C interface test

Performance of RS232C interface signal lines and the

action of the 8251 are tested.

[Display]

(1) Normal test ending

RS

OK

(2) Abnormal test ending

RS

ER

It will need wiring connection as illustrated in the figure

in order to test the RS232C interface. Pins of the RS232C

interface edge connector must be wired in the following

manner:

Front side

,---------------- —

-V

7 5

3

1

98

Advertising