Cables to Go DOCSIS Cable Modem - Manual (Page 13)

DOCSIS 1.0/ 1.1 Equivalent Cable Modem
4. After windows install the USB driver. Click Finish and Windows will ask for
reboot
Using USB with the Windows 2000 or Windows XP Operating System
To use the USB port with Windows 2000/XP:
1. Connect USB cable from PC to Cable Modem
2. Connect RF cable and Power on Cable Modem. Wait until Cable Modem register,
it will take from 40 sec to 4 min depends on Network traffic
3. Cable Modem may reboot if you previously connect it through Ethernet port
4. Windows will prompt new hardware found
9