Sharp CS-2870 - Manual (Page 7)

the decimal setting. This is useful for invoicing.
EXAMPLE: Set A/+-*-A/x to A/x
Set decimal to 2
Enter 7 0 Tape prints
3 \J]
7- X
0 03 =
0 21 *
ICi • 1C«
I 1 I
Note: Use of [T] will automatically override the A/x mode.
Addition and subtraction:
The A/x mode functions same as the A/+ mode.
Neutral
ITEM COUNT MODE SELECTOR:
*IC±": 1) The counter will count the number of times that [±] has been
pressed in addition.
Note: • Each time is used in subtraction, 1 will be sub­
tracted from the count.
• The count is printed when the calculated result is
obtained.
• Pressing of [^, [^ , [^, | avg | or |MU| clears the
counter.
2) When the grand total mode selector is in the ON position (GT),
the counter will count the number of times that the calculation
results have been stored in the grand total memory. To print
and clear the count, press .
3) The memory item counter will count the number of times that
[+1] has been pressed in the addition.
Note: * Each time Ei] 'S used in the substraction, 1 will be
subtracted from the count.
• The count is printed when the memory is recalled.
• Pressing of [*i] clears the counter.
“IC+”: 1) The counter will count the number of times that [±] or has
been pressed in addition and subtraction.
Note: • The count is printed when the calculated result is
obtained.
• Pressing of 0 , , [^ , | avg | or | mu | clears the
counter.
2) When the grand total mode selector is in the ON position (GT),
the counter will count the number of times that the calculation
results have been stored in the grand total memory. To print
and clear the count, press .
3} The memory item counter will count the number of times that