Canon W8200 - Manual (Page 189)

Specifications
13
8-13
Specifications
Dye ink Pigment ink
Printing Characteristics
Print Method Serial Bubble Jet
Print Modes Highest, High, Standard, Draft
Max. Resolution 1200 x 1200 dpi (When printing on Proofing Paper) *1
Interface
Network Interface
(10base-T/100base-TX)
1 port
USB Interface
(2.0 Compliant) Option (High Speed mode cannot be used if computer port, OS and cables are incompatible
with USB 2.0 High Speed Mode.)
*2
IEEE1394 Interface
(IEEE1394 Standard)
Option
Interface Connector
USB Interface: USB Standard Series B Receptacle
USB Interface Recommended Printer Cable:
Material: AWG28 or above
Type: Twisted-pair sealed cable (high speed mode compliant)
Length: 5.0 m
Connector: USB Standard Series B Plug
IEEE1394 Interface: IEEE1394-1995 Standard 6-pin (without feed)
IEEE1394 Interface Recommended Printer Cable
Material: AWG28 (signal) AWG22 (power)
Type: Dual twisted pair shielded cable (100, 200, 400 Mbps mode compliant)
Length: max. 4.5 m(5 yd.)
Connector: IEEE1394-1995 Compliant 6-pin
Replaceable Printhead Printhead BC-1400 Printhead BC-1450
Resolution 1200 dpi (600 dpi x 2lines)
Number of nozzles 1280 nozzles for each color
Replaceable Ink Tanks
Yellow Ink
Magenta Ink
Photo Magenta Ink
Cyan Ink
Photo Cyan Ink
Black Ink BCI-1411Y
BCI-1411M
BCI-1411PM
BCI-1411C
BCI-1411PC
BCI-1411Bk BCI-1421Y
BCI-1421M
BCI-1421PM
BCI-1421C
BCI-1421PC
BCI-1421Bk
Ink type Dye ink Pigment ink
Ink tank capacity 330 ml 330 ml
Print Media
Maximum width 1117.6 mm (44 in.)
Maximum length
Roll media: 18 m (19.7 yd.)
Cut sheet: 1600 mm (63 in.)
Thickness 80 ~ 500 µm
Type
Plain Paper, Coated Paper, Heavy Coated
Paper, Glossy Paper, Photo Glossy Paper,
Photo Semi-Glossy Paper, Glossy Film,
Back Print Film, Proofing Paper Heavy coated paper, Photo glossy paper, Photo
semi-glossy paper, Synthetic paper (Non-
Adhesive), Synthetic paper (Adhesive), Back Light
Film, Flame-Registant cloth