Vii caution – Canon W8200 User Manual

Page 9

Advertising
background image

vii

vii

Caution

TIn an Emergency ...

z To avoid a fire or serious electrical shock, if the printer emits smoke or a

strange odor, immediately press the Power button to switch the printer off
and unplug the power cord from the power supply. Discontinue using the
printer and call for service.

TCleaning the Printer

z Use only a damp, clean cloth to clean the surfaces of the printer. The

electrical contacts inside the printer become hot during normal operation.
To avoid a fire or serious electrical shock, never use alcohol, benzene,
thinner, or any other type of flammable liquid cleaner to clean the printer.

TPacemakers

z This printer generates a low magnetic field. If anyone wearing a pacemaker

experiences discomfort while working around the printer should leave the
area. Consult a physician before continuing to work around the printer.

TPrinter location

z To avoid damage to the printer or possible personal injury, place the printer

on a flat, stable surface that is safe from sudden shocks or strong vibrations
to ensure that it will not fall.

z To avoid damage to the printer which could result in a fire or electrical

shock, place the printer in a location where it is not exposed dust, direct
sunlight, high temperature, or high humidity. Use the printer location in an
environment where temperature and humidity are within the ranges of
5

o

C~35

o

C (41

o

F~95

o

F) and 10~90% RH (with no condensation).

z To avoid anything entering the printer and causing a fire, never place the

printer on a heavy wool or shag carpet.

z To avoid the hazard of a dangerous fire, keep the area around the power

supply where the printer power cord is connected so you can disconnect it
immediately if the printer starts operating abnormally (emitting smoke or
odd noises, etc.).
Locate the printer as close as possible to the power supply and make sure
the power supply is easily accessible.

z To ensure normal operation of the printer and avoid possible damage,

never install the printer near large office equipment or any other type of
electrical device that emits a strong magnetic field.

Advertising