CDA 11Z6 User Manual
Page 42
42
3. Replace the Inner Pane:
– Check that the four rubber pads are in place (D in fig. 31).
– Check that you are holding the pane the correct way. You should be able to
read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 32), and gently slide
it to the retainers H (Fig. 33).
– Top oven door only: reassemble the seal G in the correct way (fig. 34) by
hooking the no. 3 fixing hooks in the proper holes (fig. 35).
4. Unlock the oven door by opening it completely and closing the lever A on
the left and right hinges (fig. 36).
A
Fig. 31
E
F
H
Fig. 33
H
G
Fig. 34
Fig. 35
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
The top oven
door has a
sealed gasket in
the top part.
The bottom
oven door has
not a sealed
gasket in the
top part.
H
D
G
A
F
E
Fig. 32
Fig. 36