CDA 11Z6 - Manual (Page 44)

44
Product and Cabinet Dimensions (mm)
A overall height* of product 1077
B overall width of product 595
C overall depth of product (excluding handle and knobs) 567
D height of chassis 1057
E width of chassis 556
F depth of chassis 545
G
depth of oven frame and control panel
(=distance between front of chassis and front of oven door, excl. knobs)
22
I minimum inside width of cavity 560
I' overall width of cavity 600
J inside height of cavity 1065
J' overall height of cavity 1082
K minimum inside depth of cavity 550
L flush fitting cabinetry clearance 22
* All height measurements include mounted feet.
Installation
Important
– You need the following housing area to fit your oven correctly.
– The double oven is designed to fit into a cabinet of 600 mm width.
– The double oven can be built in the kitchen units, but you must ensure that it is properly ventilated.
– Lift the appliance into position onto the shelf, taking care NOT to lift it by the door handles.
– Remember the housing should not be free standing but be secured to the wall and/or adjacent fittings.
WARNING
– We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand
temperatures not less than 150° C to avoid delamination.
– The appliance must be housed in heat resistant units.
– The walls of the units must be capable of resisting temperatures of 75 °C above room
temperature.