Bose 901 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2.

Note in Figure 1 that the front of the speaker is the

flat surface and the rear is the ’'vee'* surface with the angled

panels. This orientation of the speaker is important to obtain

the proper distribution and reflection of sound radiated from

the speaker. So, point the **vee*‘ toward the wall.

3.

The distance of the speakers from the wail is very

important. For best results, the point of the “vee" should lie
from 12 to 18 inches from the wall - in any case never closer
than 6 inches or further than 24 inches.

4.

If possible, keep the area between the speaker and

the wall relatively clear and open. The sound emerging from

the rear of the speakers must reach the nearby walls and re­

radiate freely for the best results.

5.

The ideal height of the speakers is in the range from

36 to 48 inches off the floor - the height of most musical in­

struments during a concert. At a minimum, keep the speakers

12 inches from the floor.

IV.

Connecting the Speakers

The speakers must be connected to the outputs on your ampli*

fier (connect to the 8 ohm outputs if more than one output is available)

Any good quality two-conductor wire (#18 wire size or bigger) can be

used, such as ordinary lamp cord. Preserve the speaker phasing by

connecting the speaker terminal marked "8(1" to the "hot" or

- 2 -

Advertising