Connecting the microphone, Connecting the antenna, Cb antenna tips – Uniden PRO501XL User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Secure the radio to the mounting bracket with
the provided nrtounting knobs (2).
5. To mount the radio at an angle:
• Loosen the mounting knobs.
• Tilt the radio,
• Tighten the mounting knobs.
Connecting the Microphone
Plug the Microphone Cord connector into the jack on the left-hand side of the radio.
Connecting the Antenna
Connect the CB antenna plug to the
ANT.
jack on the rear panel. (For more information
on antenna installation, please refer to the instruction guide that came with your
antenna.)
CB Antenna tips
• In mobile installations (cars, trucks, or boats, etc.}, use a non-directional antenna
system for maximum transmitting and receiving performance.
• A vertically polarized, quarter-wavelength whip antenna provides the most reliable
operation and greatest range.
• A 3-way combination antenna allows you to operate all three bands (AM, FM, and
CB) with one antenna. However, it will provide a far less transmitting and receiving
range than a standard “single band" antenna designed for CB use only.
• The shorter loaded-type whip antennas are more attractive and compact than the
larger full quarter-wavelength whip. However, the shorter antennas will not provide
the maximum transmitting and receiving range that is possible with the larger ones..