2 safe vehicle belt systems – Graco SNUGRIDE 30 PD115793C User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

THE FOLLOWING BELT SYSTEMS CAN BE USED WITH YOUR

INFANT RESTRAINT, IF the seat location meets all other requirements

of these instructions and those in your vehicle owner's manual. LATCH
can be used in place of the vehicle belt system. Please refer to vehicle
owner’s manual for LATCH locations.

When using infant restraint without the base, adjust the belt as
described in this section for these types of vehicle seat belts.

Some vehicle lap/shoulder seat belts have a plastic button on the belt.

Do not allow the button to interfere with the belt routing through the

vehicle belt path when installing the seat alone or when installing the

seat and the base.

6.2.2 SAFE Vehicle Belt Systems

Lap Belts - Manually Adjusted

When buckled, the belt is
tightened manually by pulling on
the excess belt while pushing
down hard on the infant restraint.

30

Advertising