Graco SNUGRIDE 30 PD115793C User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Adjust Recline on Base:
To raise recline on base: Pull handle out
and push down as shown to one of the
3 positions
O.
To lower recline on base: pull handle out and up
until it is in the desired position ©.
There are 3 recline options.
You can identify them by the
numbers 1 through 3 in the
window on the front of the foot.
If there is red in the level indicator when the foot
is completely extended place a rolled towel
under the foot © until ONLY GREEN shows.
To Adjust Recline on Infant Restraint
WITHOUT Base:
When using only the infant restraint, CHECK
infant restraint is level with the ground. Red
level line on the warning label (see step © on
pg 35) MUST be level with the ground.
If the infant restraint is resting on the vehicle seat
and is still not level then place a rolled towel under
the infant restraint O.
Readjust the vehicle seat belt as necessary
to secure the infant restraint firmly in the
vehicle seat.
40