Bose X - Manual (Page 7)

Cleaning instructions
Clean the Headset exterior and cushions by
v/iping them v/iih a rricxst cloth. Mild soap may
be used if necessary. Do not immerse the
Headset in water. The headband cover may be
removed and washed by hand in mild soap
and cool water if it becomes soiled. To remove
it. extend the headbar>d to maximum height.
unsr>ap the cover at each end. and peel the
Velcro apart along the lop flap. After washing,
allov/ the cover to air dry before pladng it on
the headband. Replace the headband cover
v/ith the opening to the rear.
Clear Comfort cushion
replacement and maintenance
To order a replacement cushion kit. call the
Bose* Aviation Headset Order Department.
1 *800-242-9008. Before ordering, remove the
cushions and inspect the earcup foam lir>er. If
you note significant deterioration in the liners,
please order a liner replacement also.
To remove the cushion and liner
1
.
Race the Headset with the yoke arms
crossed, so that the cushions are facing
outward on both sides (see Rgure 5).
2. Unsnap tfie black trim ring on one earcup
by prying the middle rear with the edge of
your finger. Do not use a hard object such
as a screwdriver, which can mar the
3.
earcup. Once the trim ring has popped
free in back, work your way around the
earcups until the trim ring is completely
free.
Lift the old cushion off. If you v/ill be
installing a r>ew liner, proceed to the next
section. Oihenvise skip to “To replace the
cushion" on page 6.
The yoke arms should be crossed so the
cushions face outward.