U manual dialing – Kenwood TK-290/390 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For Priority Scan to function, the
Priorityt or Priority2 channei must
be programmed.
• If only one of the priority channels are
programmed, the transceiver will
automatically change to that priority
channel when a signal Is received on
it. This change occurs even if a
signal is being received on another
channel.
• If both priority channels are
programmed, Priorityt is the high
priority and Priority2 is the low
priority. If a signal is being received
on the Priorityl
channel,
the
transceiver will change to that
channel, even If a signal is being
received on the Priority2 channel.
Priority Scan
Note; This function can only be used by
transceivers with DTMF keypads.
u
Manual Dialing
To dial a number manually:
1 Press and hold the PTT switch.
• If Keypad Auto PTT Is enabled
(page 16), you do not need to
press the
PTT
switch.
2 Press the desired DTMF keys.
DTMF CALLING