Redialing, Auto dialing, Store – Kenwood TK-290/390 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Redialing
A maximum of 16 digits can be
redialed. The last number dialed,
either manually or automatically, will
be redialed.
To redial a number;
1 Press the * key.
• An “A” will appear on the display.
2 Press the 0 key.
• The transceiver will redial the last
number, and the digits will appear
on the display.
Note: If the transceiver power is switched OFF,
the redial memory will be erased.
Auto Dialing
Note: Auto dialing is either enabled or disabled
by your dealer (page 16}.
store:
To store a number in memory:
1 Press the # key.
• A "0" will appear on the display.
2 Press the desired DTMF keys to
enter a maximum of 16 digits.
• Press and hold the
PTT
switch,
then press 2, 5, 8, 0, * , or # to
enter A, B, C, D, # , or #
(consecutively).
3 Press the # key.
4 Select the desired memory
channel by pressing a DTMF key
(1 ~ 9).
• The entered number will be stored
in the memory channel selected.
i 14