Uniden UH-057 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Create a Channel Scan List with Channel Lock-Out
Feature
You may have certain channels that you do not want to hear
every time you scan. These are channels that are busy in a
major portion of time, and the scanning stops at that
channel(s) often enough to interrupt the scan cycle. You
can Lock-out those channels so they are not scanned.
There are two ways to do this.
UP
DOWN
1. UsingtheOor O switches, manually select the
UO
desired channel and press the
O
button. The locked-
out channel blinks.
2. While scanning, when the unit stops on the channel you
wish to lock-out because of its too much activity, simply
UO
press the O ^^d it will be automatically removed
from the scan list. Scanning resumes.
To remove the lock-out condition from a channel, manually
IJO
■
select the channel and press O button again. The channel
stops blinking.
UH-057
Page 18