Lead-in delay – Uniden UH-057 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For example, selecting 40 mSec
Press The LCD displays
3. Press the (|3) Key to complete the programming.
Two beeps will be heard and the unit returns to its
previous status prior to accessing Programming Mode.
Lead-In Delay
Lead-In delay is a SELCALL transmit parameter that
"wakes-up” and helps the receiver of the other radio to lock
onto the incoming signal. Everytime you Transmit a
SELCALL ID, Lead-In Delay attaches itself in the beginning
of the code sequence and makes the transmitter to be ON
longer prior to the code transmission. This sets the commu
nication link between the transmitter and the other receiver
more stable.
One major application of having a longer Lead-In Delay is
when you are Selectively Calling another radio via a
repeater station. Long Lead-In Delay helps to stabilise both
the communication link from your radio to the repeater
station and the communication link from the repeater to the
other radio.
To change the Lead-In Delay of your radio;
1. Press the for about 1.5 seconds. The LCD displays;
L
Page 31
UH-057