Programming, Receiver selcall id – Uniden UH-057 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming
SincG UH-057 can support either 5 tone or 6 tone signalling
format, you and your group must decide which format are
you going to use.
Receiver SELCALL ID
To program your own receiver SELCALL ID, do the follow
ing procedure.
1. Press and hold the Key for about 1.5 seconds.
Two beeps will be heard and the LCD displays:
2. Press the Key. The TSQ indicator appears on the
LCD Display. Flashing,
3. Enter your chosen SELCALL ID using the Numeric
Keypad.
Example: 1 2 3 4 5
Everytime you press the Numeric Keypad confirmation
tones will be heard. The SELCALL Tone assigned to the
pressed Key will be displayed on the LCD as shown:
(please see page 34 for the Numeric Key SELCALL
TONE assignment)
CD
CD
CD
CD
CD
- 5
■ c®'-
■
Page 27
UH-057