2 clerk locks – Toshiba MA-216-100 SERIES User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4-2 CLERK LOCKS
EOl-11003
Key>lock Type (Standard)
1.2
3.4
These locks are used to identify which clerk is operating
the register.
Clerk Keys (1, 2, 3, 4)
Each clerk should keep his/her clerk key. The register
will not operate unless one of these keys is inserted and
set to the correct position in the Clerk Locks. Each of
the keys rnay be inserted and pulled out in the neutral
position marked with the dot.
Push-key Type (Alternative Option)
This type may be installed in place of the standard key
lock type mentioned above, as an alternative option.
Each clerk is assigned his/her own clerk key (1 to 4).
The register will not operate unless one of these keys is
pushed down.
1
2
3
4
-
4
-