Display – Toshiba MA-216-100 SERIES User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
E01 *11003
5.
DISPLAY
The Operator's Display (front display) Is located at the top of the register just above the keyboard.
The Customer’s Display may be used as Rear Display if it is keep in the receptacle or used as
Remote Display if it is stretched up and turned to the required direction. The display has two types
of display • - numeric display and message descriptors.
OPERATOR’S DISPLAY
NUMERIC DISPLAY
AMOUNT (8 digits)
DPT (2 digits):
RPT (1 digit):
Displays the numeric data, such as amount, quantity, etc.
Displays the code which represents each Department key. It stays lit
when repeating the same department entry.
Displays the repeat count of the same item. The count is indicated
from the second entry on, and only the last digit will be displayed even
if the count exceeds nine.
PLU (3 digits; Uie DPT and RPT digits are commonly used for this purpose,):
Displays the PLU code when any PLU is entered. It goes out when
repeating the same PLU entry.
-5-