2)to finish configuring the alarm, To restore the previous configuration, Configuring the camera (cont.) – Toshiba IK-WB11A User Manual
Page 58: 2 ) t o finish configuring the alarm
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m 0)
3"
(D
-1
№
0°o
Configuring the Camera (Cont.)
Configuring Alarm Output Settings
The alarm output terminal (^page 94) facilitates the use of a siren, buzzer,
emergency light, or other device when an alarm goes off.
1) Set the alarm notification time for "Output Hold
Time" of the "Alarm Output" setting
■
This setting is only valid if a light or other component is connected to
the alarm output terminal.
■
Select a time from 1,5, 10, 15, 30, and 60 seconds.
^NOTE
• A new alarm cannot be received while an alarm recording (sound) is playing.
2 ) T o finish configuring the alarm,
click the I
save II
button below the settings
■ The changes are saved.
To restore the previous configuration,
click the Ho
button below the settings
■ The changes are discarded.
^NOTE
• For details on connecting alarm output components, refer to the respective
manuals of the components.