RCA VR634HF - Manual (Page 37)

RECORDING
2
.
3.
4.
5.
6
.
Insert a tape with safety tab in place.
If your VCR viewing channel is 3 or 4, make sure the VCR
indicator appears in the VCR's display panel. If not, press
TV*VCR to turn it on.
Use the SPEED button on the remote to select a recording
speed. The tape speed indicator appears on the TV screen.
Select the channel or line input to be recorded.
Set the Reception: STEREO/MONO/SAP feature for the type of
audio you want to record. See Other Features section.
A U D I O
1 R e c e p t i o n : S T E R E O
Z T a p e P l a y b a c k : H I - F I
0 E x i t
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Video Input Channel Explained
For more information about video
line input, see "How to Find Your TV's
Video Input Channel" in the
References section of this manual.
RECORPINC AUDIO ONLY
You can record audio only from another audio source connected
to the AUDIO IN (R and L) jacks on the back or front of the VCR.
1. Press the INPUT button on the remote to select the line
input (LI or L2). Select (LI) to record from the back jacks or
(L2) to record from the front jacks.
The VCR will record audio from the audio equipment
connected to the AUDIO IN jacks.
2. Use TAPE SPEED on the VCR (SPEED on the remote) to select
the recording speed.
3. Start audio source playing and press RECORD to begin
recording.
4. Press STOP when you are finished.
PLAYING BACK AUDIO ONLY
To get stereo sound, connect the AUDIO OUT jacks of the VCR to
the appropriate input on your amplifier or receiver. Do not use
the phono input. Refer to your amplifier or receiver user's guide.
C o n t i n u e d o n f / i e Next Page
Recording audio only wilt erase
anything that was previously
recorded on the tape.
Audio Connection
BACK OF AMPLIFIER ! RECEIVER
35