Usino two vcrs for copying and editing tapes, Recording – RCA VR634HF User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING
USINO TWO VCRS FOR COPYING AND
EDITING TAPES
Use one VCR as the
playback VCR
and the other as the
recording VCR.
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input). (See page 68 for more information)
4. If you are using coaxial cables for the connection, tune
recording VCR
to channel 3 or 4—^the one selected on the
playback VCR
If you are using audio/video cables, select the line input on
the
recording VCR
5. Insert the tape you want to copy into
playback VCR.
Insert a
blank tape with its safety tab in place into record/ng
VCR
6. Using visual search, locate the segment you want to copy on
the
playback VCR.
Pause the tape at this location
7. Press RECORD on the
recording VCR,
then PAUSE
8. Press PAUSE on both VCRs to begin copying
9. Press PAUSE on both VCRs to stop copying
10. Repeat steps 6-9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
36