Connections, Things to know before connecting components – RCA VR634HF User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671318/55/background.png)
CONNECTIONS
THINGS TO KNOW BEFORE
CONNECTING COMPONENTS
PROTECT YOUR COMPONENTS FROM
POWER $UROES
•
Connect all components before plugging any power cords
into the wall outlet.
•
Always turn off the TV and other components before you
connect or disconnect any cables.
POSITION CABLES CORRECTLY TO AVOID
AUDIO HUM OR INTERFERENCE
•
Insert all cable plugs firmly into their jacks.
•
Place the audio/video cables to the sides of the TV’s back
panel instead of straight down the middle after you connect
your components.
•
Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.
•
Make sure all antennas and cables are properly grounded.
Refer to the Safety Tips sheet packed with your unit.
PROTECT YOUR COMPONENTS FROM
OVERHEATINC
•
Do not block ventilation holes in any of the components.
Arrange the components so that air can circulate freely.
•
Do not stack components.
•
Allow adequate ventilation when placing your components
in a stand.
•
•
Place an amplifier or satellite receiver on the top shelf of
the stand so heated air rising from it will not flow around
other components.
^ FIRSTTHINGS FIRST
Y
i SETTING UP THE VCR
Y
3
VCR BASICS
Y
4
recording
Y
5 PROGRAM
the
REMOTE
Y
OTHER FEATURES
Y
I
7 CONNECTIONS
Y
3
references
53