Printing position and slip size – Toshiba MA-1190 User Manual
Page 85
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SET:
INPS 2 STATUS
[TRF]
will
only
be
printed.
All
other
items
will
be non-print, (in case of PB MANUAL ENTRY type)
The
Customer
File
Code
and
[TRF]
will
only
be
printed. All other items will be non-print.
(in
case of CUSTOMER FILE type)
4> The gap of the slip inlet is usually opened, and the slip may be inserted
or withdrawn freely.
When
a
slip
is
properly
set
to
the
remote
slip
printer
and
the
ECR
is
operated,
the
gap
will
be
closed
and
printing
will
be
performed.
When
the
sale
is
finalized,
the
receipt
is
issued
and
then
the
gap
of
the
DRS-107
will
be
opened
to
allow
the
slip
withdrawal.
(The
gap
keeps
closed during registration.)
3.
Printing on the remote slip will be performed alteranately with printing on
the receipt/journal of the ECR.
6. The EJECT key on the DRS-107 may be used to open the closed gap in order to
withdraw the slip and skip unnecessary item print. The EJECT key will be
disregarded if the slip is set and the ECR receipt/journal printer is in a
printing action.
7. Printing Position and Slip Size:
88.4mro (42 digits)^ i 7.8mm ^
Print Space
Last Line Position
21.2mm minimum*
* NOTE:
The space below the "Last Line Position" (i.e. the 21.2mm
area at the bottom) cannot be printed.
As
typical
applications
of
remote
slip
printing,
samples
of
endorsement,
invoice, and customer file are placed on the following pages.
- 81 -