RCA RV-9978 - Manual (Page 17)

USING THE UNIVERSAL REMOTE CONTROL
DELAY/CH CTRL Selects the amount of Surround
Sound delay between the main and rear speakers.
Choose from 15, 20 or 30 milliseconds. Press once and
the current setting appears. Press again to change the
setting.
SURROUND Lets you select a Surround Mode; Dolby
Pro Logic Surround, Dolby 3 Stereo or Hall. Press once
to turn on the surround mode last selected. Press
again to change
the mode.
SWAP AUDIO Swaps the audio only from the large
picture to the small picture when you are watching TV
and using picture-in-picture (PIP).
( SURROUND SOUND LEVEL CONTROL^
+ Increases the volume in rear and center speakers.
- Decreases the volume in rear and center speaker.
BYPASS Turns on Bypass mode, which cancels all
Surround sound modes. Sound is generated without
effects.
REAR*CTR LEVEL Adjusts the balance level of the
rear and center speakers. Press once for Center. Press
again for Rear.
RECEIVER/TUNER CONTROLS ')
CH + and CH - Tunes the receiver to the next or
previous preset station stpred in the receiver's
memory,
FWD Lets you manually move up the AM/FM band.
INPUT*SEEK Selects auto tuning or manual tuning
mode.
MENU SELECT Stores the selected station in the
receiver's memory.
Number Buttons Let you enter numbers when
needed.
REV Lets you manually move down the AM/FM band.
C TV CONTROLS ')
+ On some RCA TV models, used to adjust menu
controls.
- On some RCA TV models, used to adjust menu
controls.
ANTENNA Changes the antenna input.
CH + and CH - Tunes the TV channel up and down.
CLEAR Removes any menu from the screen,
DELAY/CH CTRL In some RCA TV models, lets you
control the channel that appears in the PIP window or
the main screen in PIP mode.
GO BACK'DISC Returns to the previous channel.
GUIDE*RDM For some models, brings up 12 small
pictures (previews of the next 12 channels in the
channel list). Press again to turn off channel guide.
INFO Displays channel information.
INPUT*SEEK For some TV models, toggles through the
available input sources.
MENU SELECT For some models, stores channels in the
TV's memory.
MOVE arrows in some models, when using PIP, moves
the small picture to another corner of the screen. Also,
used for menu navigation in some TV models.
Number Buttons Let you enter channel numbers and
time settings when needed.
PIP Turns on and off picture-in-picture on most RCA
TV models with PIP.
POWER Turns the TV off.
RESET*REP Returns picture quality controls to their
original settings.
SKIP To change channels, press once. The TV will wait
30 seconds before returning to the original channel.
Press repeatedly to increase the time.
SWAP PIP Swaps the main picture in the PIP window.
TV Turns on the TV and puts the remote in TV mode.
TV MENU Displays the TV's on-screen menus.
VCR CONTROLS
CH + and CH - Tunes to the next or previous channel
when watching TV through the VCR.
17