RCA RV-9978 - Manual (Page 18)

USING THE UNIVERSAL REMOTE CONTROL
CLEAR Resets the tape counter and corrects entries
when programming the menus.
FWD Fast forwards a tape. Also, searches forward
while a tape is playing.
GO BACK'DISC Returns to the previous channel.
INFO Displays channel, time and counter information
on the screen.
INPUT*SEEK For some VCR models, selects line input
or tuner.
LD*VCR2 For some VCR models, if programmed, turns
on a second VCR and puts the remote in VCR2 mode.
MENU SELECT Displays the on-screen
programming menus.
Number Buttons Let you enter numbers when
needed.
PAUSE Pauses a tape.
PLAY Plays a tape.
POWER Turns the VCR off.
REC Records a tape.
REV Rewinds a tape. Also, searches backward while a
tape is playing.
SKIP To change channels, press once. The TV will wait
30 seconds before returning to the original channel.
Press repeatedly to increase the time.
STOP Stops a tape.
VCR Turns on the VCR and puts the remote in VCR
mode.
c DVD PLAYER CONTROLS
CH + and CH - Changes to the next higher or lower
track on DVD.
DVD Turns on the DVD player, and puts the remote in
DVD mode.
FWD Scans forward on the DVD.
Number Buttons Let you change to a specific track.
PAUSE Pauses the DVD.
PLAY Plays the DVD.
PLAYLIST For some DVD models, if programmed,
programs the DVD player to playback tracks in a
certain order.
POWER Turns the DVD player off.
REW Scans backward on the DVD.
STOP Stops the DVD.
c
SATELLITE RECEIVER CONTROLS
ANTENNA Toggles between antenna input and
satellite receiver input.
CH + and CH - Tunes to the next or previous channel
when watching TV through the satellite system. Steps
through the pages in the guide if in guide mode.
GUIDE*RDM Displays the guide on the screen.
INFO Displays satellite header on screen. When in the
guide, lets you select a program. Lets you select an
option in a menu.
MOVE arrows Lets you point to different on-screen
menu items.
Number Buttons Let you enter numbers when
needed.
POWER Turns the RCA DSS* receiver off.
C
CD PLAYER CONTROLS
3
CD Turns on the CD player and puts the remote in CD
mode.
CLEAR Clears an entry when programming the CD
player.
FWD Moves forward through the CD one track at a
time.
GO BACK*DISC Selects a disc to be played. Press GO
BACK ‘DISC and then the CD number using the number
buttons.
GUIDE*RDM Activates the Random function, which
plays a random selection of tracks from one or all CDs.
INFO In some CD models, lets you switch between the
number track information and time information.
18