Compass/temperature button – Chrysler 2009 Aspen - Owner Manual User Manual

Page 175

Advertising
background image

the RKE Transmitter. To make your selection, press
and release the RESET button until “OFF,” “30 sec.,”
“60 sec.,” or “90 sec.” appears.

• PARK ASST. SYSTEM > ON – When YES is selected,

the Rear Park Assist System is activated. When NO is
selected, the System is deactivated.

• “UNIT IN > U.S./METRIC” – The EVIC odometer can

be changed between English and Metric units of
measure. To make your selection, press and release the
RESET button until “US” or “METRIC” appears.

• “COMPASS VARIANCE > 8” – Press the RESET

button to change the compass variance setting. Set this
to your current location. If you change location,
change your variance according to your variance on
the variance map. Refer to Compass Variance Map in
this section.

• “COMPASS CALIBRATE > YES” – Press the RESET

button to manually calibrate the compass. Refer to
Manual Compass Calibration in this section.

Compass/Temperature Button

Pressing the Compass/Temperature button
will return the display to the normal compass/
temperature display.

NOTE:

Temperature accuracy can be affected from heat

soak. For best accuracy, the vehicle should be driven at a
speed greater than 20 mph (32 km/h) for several min-
utes.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

173

3

Advertising