Clock setting procedure, Operating instructions — voice recognition, System (vr) — if equipped – Chrysler 2009 Aspen - Owner Manual User Manual

Page 220: Operating instructions — hands-free, Communication (uconnect, If equipped

Advertising
background image

Operating Instructions — Voice Recognition
System (VR) — If Equipped

For the radio, refer to “Voice Recognition System (VR)” in
Section 3.

Operating Instructions — Hands-Free
Communication (UConnect

) — If Equipped

Refer to “Hands-Free Communication (UConnect

௡)” in

Section 3.

Clock Setting Procedure

Global Positioning System (GPS) — RER only
The GPS receiver used in this system is synchronized to
the time data being transmitted by the GPS satellite. The
satellites’ clock is Greenwich Mean Time (GMT). This is
the worldwide standard for time. This makes the sys-
tem’s clock very accurate once the appropriate time zone
and daylight savings information is set.

To Manually Set the Clock — RER/REN

1. Turn on the multimedia system.

2. Touch the screen where the time is displayed. The
clock setting menu will appear on the screen.

3. To move the hour forward, touch the screen where the
word “Hour” with the arrow pointing upward is dis-
played. To move the hour backward, touch the screen
where the word “Hour” with the arrow pointing down-
ward is displayed.

4. To move the minute forward, touch the screen where
the word “Min” with the arrow pointing upward is
displayed. To move the minute backward, touch the
screen where the word “Min” with the arrow pointing
downward is displayed.

5. To save the new time setting, touch the screen where
the word “Save” is displayed.

218

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising