Setting the analog clock – Chrysler 2009 Sebring Convertible - Owner Manual User Manual

Page 204

Advertising
background image

off if they were turned on by this feature. To make your
selection, press and hold the RESET button until ON or
OFF appears.

NOTE:

Turning the headlights on during the daytime

causes the instrument panel lights to dim. To increase the
brightness, refer to “Lights” in Section 3 of this manual.

Key Off Power Delay
When this feature is selected, the power window
switches, radio, hands–free system (if equipped), and
power outlets will remain active for up to 10 minutes
after the ignition switch is turned to the LOCK position.
Opening a vehicle door will cancel this feature. To make
your selection, press and hold the RESET button until
OFF, 45 sec, 5 min, or 10 min appears.

Illumination Approach
When this feature is selected, the headlights will activate
and remain on for up to 90 seconds when the doors are

unlocked with the RKE transmitter. To make your selec-
tion, press and hold the RESET button until OFF, 30 sec,
60 sec, or 90 sec appears.

Display Units in English or Metric
The EVIC and odometer can be changed between English
and Metric units of measure. To make your selection,
press and release the RESET button until US or METRIC
appears.

SETTING THE ANALOG CLOCK

To set the analog clock, lo-
cated at the top center of the
instrument panel, press and
hold the button in until the
setting is correct. The clock
will adjust slowly at first and
then quicker the longer the
button is held.

202

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising
This manual is related to the following products: