Manual bypass mode, Wind stop - if equipped – Chrysler 2009 Sebring Convertible - Owner Manual User Manual

Page 92

Advertising
background image

1. Read all of the Notes, Cautions, and Warning found
under “Power Convertible Top Usage Precautions” to
verify all operating conditions are met.

2. Check for Operation and Warning Messages as de-
scribed under “Power Convertible Top Operation &
Warning Messages.” If applicable, perform the related
action to correct the condition present.

3. If Steps 1 and 2 do not resolve the problem, see
“Manual Bypass Mode” Section.

Manual Bypass Mode

In case of an unresponsive power top system, there is a
customer Manual Bypass Mode. If the power top mal-
functions mid-cycle, press the interior POWER TOP
switch in the Top Up direction five times within two
seconds. This mode will allow the top to close with
failures. Once the top is closed, please see your autho-
rized dealer.

NOTE:

This process may take a more significant

amount of time to fully close the power top. It’s not
uncommon to see 30 second delays before operation
begins.

Wind Stop — If Equipped

The Wind Stop installs in the backseat area of the vehicle.
The Wind Stop will not interfere with power top opera-
tion. Therefore, it can remain installed when the top is up.
However, when not in use, the Wind Stop folds to allow
for convenient storage underneath the cargo shield in the
trunk.

NOTE:

It is recommended that you lower the convert-

ible top before installing or removing the Wind Stop.

Installing the Wind Stop

1. Remove the Wind Stop from the trunk.

2. Unfold the Wind Stop framework.

90

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising
This manual is related to the following products: