Autostick — if equipped, Operation, Autostick௡ — if equipped – Chrysler 2010 Sebring - Owner Manual User Manual

Page 249

Advertising
background image

damage, the transmission automatically shifts into sec-
ond gear (third gear for six–speed). The transmission
remains in second gear (third gear for six–speed) despite
the forward gear selected. PARK, REVERSE, and NEU-
TRAL will continue to operate. The Reset feature allows
the vehicle to be driven to a dealer for service without
damaging the transmission.

In the event of a momentary problem, the transmission
can be reset to regain all forward gears by performing the
following steps:

1. Stop the vehicle.

2. Shift the shift lever into PARK.

3. Turn the ignition switch to the LOCK position.

4. Restart the engine.

5. Shift the shift lever into the desired gear range and
resume driving.

NOTE:

Even if the transmission can be reset, it is

recommended that you visit a dealer at your earliest
possible convenience. Your dealer has diagnostic equip-
ment to determine if the problem could recur.

If the transmission cannot be reset, dealer service is
required.

AUTOSTICK

— IF EQUIPPED

AutoStick

௡ is a driver-interactive transmission that offers

six manual ratio changes to provide you with more
control. AutoStick

௡ allows you to maximize engine brak-

ing, eliminate undesirable upshifts and downshifts, and
improve overall vehicle performance. This system can
also provide you with more control during passing, city
driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.

Operation

By placing the shift lever one shift-level below the DRIVE
position, it can be moved from side to side. This allows

248

STARTING AND OPERATING

Advertising
This manual is related to the following products: