License plate lamp – Chrysler 2010 Sebring - Owner Manual User Manual
Page 391
Advertising
![background image](/manuals/671731/391/background.png)
3. Remove the bulb from the connector socket and install
the replacement bulb.
4. Install the bulb and connector assembly into the
housing and rotate the connector one-quarter turn clock-
wise to lock it in place.
License Plate Lamp
1. Remove two retaining screws holding the lamp lens in
place.
2. Gently pry the lens loose.
3. Pull bulb from socket, replace and reattach the lamp
lens with the two retaining screws.
390
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: