Chrysler 2010 Sebring - Owner Manual - Manual (Page 395)

Component Fluid, Lubricant, or Genuine Part
Spark Plugs – 2.7L Engine TE10PMC5 (Gap 0.050 in [1.27 mm])
Spark Plugs – 3.5L Engine ZFR5LP-13G (Gap 0.050 in [1.27 mm])
Fuel Selection – 2.4L and 2.7L En-
gines
87 Octane
Fuel Selection – 3.5L Engine 87 Octane Acceptable – 89 Octane Recommended
* PZEV = Partial Zero Emission Vehicle
Chassis
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission
MOPAR ௡ ATF+4௡ Automatic Transmission Fluid or equivalent licensed
ATF+4
௡ product.
Brake Master Cylinder
MOPAR ௡ DOT 3 and SAE J1703 should be used. If DOT 3 brake fluid is not
available, then DOT 4 is acceptable. Use only recommended brake fluids.
Power Steering Reservoir
MOPAR ௡ Power Steering Fluid +4, MOPAR௡ ATF+4௡ Automatic Transmis-
sion Fluid or equivalent licensed ATF+4
௡ product.
394 MAINTAINING YOUR VEHICLE