Special additives, Fluid level check – four-speed transmission – Chrysler 2013 200 - Owner Manual User Manual

Page 453

Advertising
background image

CAUTION!

Using a transmission fluid other than the manufac-
turer’s recommended fluid may cause deterioration
in transmission shift quality and/or torque converter
shudder. Refer to “Fluids, Lubricants, and Genuine
Parts” in “Maintaining Your Vehicle” for fluid speci-
fications.

Special Additives

The manufacturer strongly recommends against using
any special additives in the transmission.

Automatic Transmission Fluid (ATF) is an engineered
product and its performance may be impaired by supple-
mental additives. Therefore, do not add any fluid addi-
tives to the transmission. The only exception to this
policy is the use of special dyes for diagnosing fluid

leaks. Avoid using transmission sealers as they may
adversely affect seals.

CAUTION!

Do not use chemical flushes in your transmission as
the chemicals can damage your transmission compo-
nents. Such damage is not covered by the New
Vehicle Limited Warranty.

Fluid Level Check – Four-Speed Transmission

Use the following procedure to check the transmission
fluid level properly:

1. Park the vehicle on level ground.

2. Run the engine at normal idle speed for at least

60 seconds, and leave the engine running for the rest
of this procedure.

7

MAINTAINING YOUR VEHICLE

451

Advertising